Direkt zum Inhalt

MULTIduct™ Micro

Micro MULTIduct (1)
Micro MULTIduct (2)

MULTIduct™ Micro is a multiple duct bank system used or constructing under road crossings, bridge crossings and linear routes.

Duct banks are built by connecting 500mm sections by push-fit system. The system is available in 4 and 6 way profiles and each duct space offers a space of approximately 50mm x 50mm for cables.

MULTIduct™ Micro is manufactured from High Density Polyethylene (HDPE) which offers high strength-to-weight properties, resulting in a product that has high crush resistance but falls under 3kg per unit in weight. 

Lightweight, strong, flexible duct system for constructing UTX/URX, bridge crossing & linear routes.

Jetzt Anfragen

* indicates a required field

Enter your enquiry details
  • Strong
    MULTIduct™ Micro has a high crush strength making it more robust with no breakages. The high strength enables it to be buried at a much shallower depth compared to conventional ducting. 
  • Environmental
    HDPE material consists of 70% recycled content and is completely recyclable at the end of its life. 
  • Light Weight
    All MULTIduct­™ Micro parts are under 3kg this makes them easier to handle, install on site, transport and reduces health and safety issues.  
  • Fast Installation
    Rapid installation for every application resulting in more work completed during track possessions or road closures.  
  • Economical
    MULTduct™ Micro can be installed with less excavation needed due to shallower burial, no special plat required for lifting and no concrete surround, specialist backfill or spacers required. 

  • Superior 
    MULTIduct™ Micro is manufactured to ISO 9001 and ISO 14001

 STAKKAbox™ Ultima is commonly used for the following applications:


  • Motorway Communications
  • Drainage


  • Telecommunications 
  • Drainage
  • Buried Cable Routes

Power & Energy

  • High Voltage power cable jointing
  • Low Voltage power cable link boxes


  • Jointing chambers


MULTIduct™ Micro is manufactured in nitrogen-foamed High Density Polyethylene, of which up to 70% is recycled material

Benefits of HDPE:

  • Excellent chemical resistance to ethanol, acetone, diesel etc.
  • Unaffected by sulfate ground conditions.
  • Recyclable
  • Robust - no breakage waste
  • Completely impervious to water
  • Nitrogen injection creates cellular core (CFC free)
  • High strength to weight ratio
  • High stiffness to weight ratio
  • Easy to cut for duct entries

 Size Range:

MULTIduct™ Micro (4 way)



MULTIduct™ Micro (6 way)